Antec comes out of the woodwork with sub-$100 mid-tower case

A mid-tower enclosure with lots of cooling options.

Anyone who has been around the block a time or two should be familiar with Antec, a recognizable name that has been around for more than three decades. While Antec has been fairly quiet as of late, it does have a new mid-tower chassis available, one that sports a tempered glass side panel and costs less than a Benjamin.

The new P8 is part of Antec's Performance One series. It measures 443mm (H) x 210mm (W) x 470mm (D) and weighs 16.5 pounds without any hardware shoved inside.

There are plenty of cooling options here. Antec includes three 120mm fans, two up front and one in the rear. If that is not enough, you can add three more up top and one more in the front. You can also use 140mm fans—there is room for two in the front and two up top.

Builders have the option of liquid cooling in this case, too. The front of the case can accommodate up to a 360mm radiator, and there rear can hold a 120mm radiator. There is room for a 120mm or 240mm radiator at the top of the case too, though Antec warns that space can limited by the motherboard dimensions and RAM.

There are two 3.5-inch drive bays that are both compatible with 2.5-inch SSDs. Likewise, builders will find four dedicated 2.5-inch SSD mounts.

Antec promises easy maintenance with dust filters located at the top, front, and underneath the PSU, which sits in its own chamber at the bottom. There is also "ample space" to hide cables behind the motherboard tray, and plenty of cable routing holes to play with.

The P3 is listed for $85 on Antec's website, but shows it as being "not available." Newegg has it for $90, plus $6 shipping.

This is the article Antec comes out of the woodwork with sub-$100 mid-tower case this time, hopefully can benefit for you all. well, see you in other article post.

Hello Guest,

If you want to buy product through an online shop, now is the time, there are many choices of products available and at a reasonable cost.
Here is a List of Products that might interest you, Choose one of the following categories:

TIPS:

How to choose the best product depends on several factors, and it's important to sit down and consider these before you make the purchase to be sure you will be satisfied with your results.

This is a good time to read some review on the products you are considering. Pay close attention to what the most common positive ones are, and weigh this information against any negative factors. Do most people feel the product performs well?

See and Don't totally rule out a possible selection just because there are a couple of negative comments, if there are many more positive one's, as well. Some people just like to complain. It's good to take all factors into consideration and then make your decision based on that. I hope you found this article helpful in determining what the best product is for you.