Showing posts with label Kodak Bantam. Show all posts
Showing posts with label Kodak Bantam. Show all posts

Darkroom Diaries: Mastering Microfilm with HC-110

Looking to shoot film on a budget?  How about this "All You Can Eat Buffet" deal of the film world! For the cost of about 2 rolls of film, you are supplied with enough film to make about 20 or more rolls of film! This film has a nice slow speed and fine grain to allow you to open the lens up on most cameras in full sun, and it comes free of perforations, making an ideal candidate to stock 828 cameras with film! 

So what's the downside?  Well, there's lots of contrast that needs to be tamed in order to get an image with a more pictorial feel.  And the lack of sprockets that makes this a great 828 film also makes it very difficult to use in 35mm cameras, with some models needing some degree of modification, with some other cameras entirely unable to use the stock.  

This bargain film stock is microfilm, a long established medium of Archivists for the preservation of print media. Though never manufactured for pictorial use, this fine grained stock can be adapted for use in 828 and many 35mm cameras with a few caveats.

The most inhibiting of these caveats is the lack of perforations (sprockets) in most microfilm stocks.  This is film that was designed to be fed through a viewer with direct wheel contact, rather than fed through a camera with sprocket gearing and teeth.  This works fine in an 828 camera, but will slip when fed through manual advance 35mm cameras.  Many of the more modern 35mm film cameras with auto advance use an IR sensor that counts the film sprockets in 35mm stock as it advances.  With non-perforated microfilm, these cameras have no sprockets to count, and will simply give up and return the film to the 35mm cassette after attempting to load it.

For manual advance cameras that use a toothed wheel to pull film onto the take up spool, an improvised solution is to apply a layer or two of painters tape to the this wheel to increase adhesion and avoid the slippage that would otherwise result.  Within two minutes of trying this with a Ricoh KR30SP that I have, I had a camera that readily accepted the Microfilm stock.

Two 35mm cameras that will accept microfilm without any modification are the Canon 10S and the original Voigtlander Vito.  Both of these use a contact wheel that lacks teeth to advance film onto the take up spool.

So this all established, what are the rest of the challenges to using this medium?  The first would be supply.  Microfilm isn't typically found in the same places that those of us shooting conventional film pick up our supply.  Neither B&H nor Freestyle sells it, but it can typically be found on eBay.  If lucky, one can find single (100 foot long) roll sales for under $20.  It may take some patience and scouring, but it is out there.

Somewhat less challenging is the process of preparing a length of microfilm for use in a camera.  With 35mm, this involves taking a reusable cartridge, and either loading it with a length of film in the dark, or using a daylight bulk film loader.  Either method should work, but I used the former method, limiting the length of film to about an 18 shot roll.

I also loaded some 828 rolls by simply doing the same process above, but instead interleaving it with 828 backing paper (that the film was taped to on its beginning side) as I wound it onto an 828 spool. It wasn't long before I had three rolls of film ready to use in a variety of cameras.

Shooting this film involves some additional challenges.  I found that rating the Kodak Imagelink 1461 film at about ISO 20 seemed to give the best results.  

I knew I would encounter the potential for a lot of contrast when developing, and elected to scale back my typical stand development time (using Kodak's HC-110 developer at a 1:99 dilution) from 30 minutes to only 16 minutes.  This resulted in some pretty thin negatives, but these scanned with no issues whatsoever.

Below are some samples from my first three rolls of microfilm - the "All You can Eat Buffet" of the photographic world. 

On a very sunny day, I ran a short roll of Microfilm through a Bantam f/8 828 camera.  This wound up working perfectly with the slow shutter of the camera, and delivered some particularly good images given the very limited capabilities of this basic camera. Contrast is a bit high still, but not in an overwhelming way.


A deep blue sky is well rendered by the Kodak Imagelink Microfilm.

Sometimes, the tamed contrast of the images would actually get in the way a bit.  Details of this photo tend to mush together a bit.

An extremely pleasing image and experience.  This roll of film likely cost me under 50 cents to make, and about the same to develop. 

Were there no modern cars and signs around, this basic snap shot might be mistaken for a vintage image.

Shadows in some scenes tend to get lost in the murk.

Another scene where shadow details get murky.

Some promise to be seen in these images, particularly when much of the foliage goes away, and some stark scenes can be recorded on this film.

The Ricoh was the most advanced of the cameras I tested the film in.  On an overcast day, the contrast works pretty well with this film, and the better lens handles shadows with less murk.

Shot wide open, this result lends to a nice blurring of the distant backdrop.

Stopped down, the sharpness of the film is excellent! 

Shallow depth of field is one of the main strengths of using such a slow film.

A quick street shot shows some excess contrast, but is still salvageable.

Wide open and full of bokeh.

Despite being nearly 30 years older than the Ricoh, and having a slower lens, a Kodak Bantam RF put forth some stellar images as well from the microfilm.  The slow speed allowed me to shoot most of the roll wide open even with the Kodak's meager shutter. This is one of my favorite results.


Another image on the Bantam RF. The triplet lens on this model really delivered nicely.

Shot into a bit of backlight, I managed some really nice results, sharp in the foreground and full of dancing bokeh behind. 

Yet again, the Bantam's lens delivers. The film offers a perfect amount of bold contrast. 

The Bantam RF worked handily through it's first roll of microfilm in a nice range of settings. 

For many scenes, such as this one, there is nothing amiss to the viewer to indicate this is anything other than normal photographic film.

Another close focused, shallow depth of field shot. Good tonality.

Yet again, this film puts forth a really sharp image.

It's nice to be able to shoot a camera with a modest shutter wide open by using such a slow film, and even nicer when that camera puts forth a great result. 

Background cannons painted black tend to blur together in this photo. 

A grab shot that is one of my favorites from the light playing off the various glass panes differently.

If the samples from this first roll is any indication, the Bantam RF will see this film often.

One final shot was badly overexposed, but was contained in post processing to make a barely salvageable result.

Despite a few trials and tribulations to discover a good speed rating for this film and to find a way to use it in a metered 35mm camera, I'm more than happy with the results delivered by this ultra affordable film medium.  I'll be trying future rolls of microfilm with other developers and will certainly post more results, given that I've only put a dent in the two massive rolls I've purchased! 

Fun with Film: Agfa 100 HDC

When it comes to color film, there have been Kodak loyalists, Fuji Loyalists, and those who just like shooting film regardless of who made it.  I'm certainly one who falls in the latter camp, but I've long admitted a particular fondness for Agfa color films.  I love Ultra 50, used to shoot a bit of my favorite portfolio shots on Portrait 160, and had also liked using their "general purpose" color films as well.

One of those films, not often found today, was Agfa 100 HDC.  It was a very clean and snappy film, and one that I tended to find more neutral than the warm tones of Kodak Gold or the cool hues of many Fuji stocks.  

I managed to come across a short sample roll of HDC not too long ago, and decided to give it another try.  To get as many images from the roll as I could, I spooled it onto my custom 828 backing and shot it in square format through the Bantam RF for which I had the 24x24mm square mask made.  Here is a look at some of the good and not so good from this roll.  


I was quite pleased at how this long expired film had held up over the decade and change since it was made.  Taken in late afternoon light, this image conveys a look that looks just like the scene taken.  The blue-green color of the street posts is actually the shade they are painted.




Curiously, some of the green tones have picked up some warm rosy undertones, as this image conveys. 


Contrast in my results could tend to be soft in spots, such as in this image. 


When immersed in shadow, the colors were muted, but still rather neutral. 


Unlike many expired films, the grain has held together well in this sample roll. 

I tried zeroing out the saturation in this image to see how it would appear.  Nice tonality, though a true black is missing. 

I wish I had shot more of this film in better light, as the soft overcast tends to take a bit from the rendering of this film stock. 

Overall, I was happy with the results from this roll of 100 HDC, and have managed to find a longer roll to put into use in the not too distant future.  Maybe I'll shoot it in a true 35mm camera, or maybe I'll have a bit more fun with that square format Bantam!    

Kodachrome 2017 - In COLOR!

As dusk descended upon the historic town of Frederick, the man set his trusty 1947 vintage Kodak Bantam atop his tripod facing a scene of increasing darkness along Carroll Creek and fired off his last shot of the roll of Kodachrome 828 film, experimenting with a setting of 10 secconds at f/11 and drew his photographic day to a close.  The day had been a long one, starting off with delays and disruption from livestock on the B&O Railroad line linking Frederick with Washington, DC, but had managed to improve quite a bit, turning out to be an unseasonably warm Winter's day with vivid blue skies.  Returning home, he unloaded the film from the Bantam and prepared to mail the parcel off to be developed in the hopes he had made the proper exposure calls through his sojourn of the day so as to get some rich color slides back from the 828 Kodachrome.

Reading the narrative above, one might think it depicts a time long passed in settings vastly different in appearance than they are today, but this in fact a condensed retelling of the events I experienced on January 25, 2017.

Yes, you read that title right.  Like a phoenix rising from the ashes, it is possible to shoot Kodachrome again and get results in color!


Just what is this you are looking at?  Read on! (Photo by Kelly-Shane Fuller)




Kodachrome film itself ceased production in 2009, and its unique K14 developing process called it quits when Dwayne's Photo Lab developed its last rolls of Kodachrome at the end of 2010.  The result is that photographers who may have some Kodachrome on their hands were largely stuck to developing it in black and white chemistry and getting negatives which often displayed a somewhat odd tonality.  It seemed as if any chance of getting color positives from Kodachrome was never going to occur again.

But even after the process was discontinued, a few people have managed to develop color slides from Kodachrome film successfully.  Stephen Frizza briefly created a buzz among some enthusiasts when he showed that it was in fact possible to get color images from Kodachrome film, albeit using alternate methods with the likelihood of far less archival stability than the original process.  

The latest enthusiast to engineer a way to generate color positives from Kodachrome film is Kelly-Shane Fuller of Piratelogy Studios.  The Oregon based film photographer has devised a process that is cumbersome even by his own admission, but manages to create a positive transparency that incorporates dyes to mimic the color couplers that were part of the original K14 process.  It's a very creative technique that is admittedly imperfect compared to the "official" process, but it is amazing nonetheless.

While Mr. Fuller had spotlighted this ability, he had to contemplate if he would make the process available as a public service for the Kodachrome nuts like myself who would still love to have the option of developing their Kodachrome film and have color images.  On January 24, 2017, he made the announcement that he'd offer film developing of K14 based Kodachrome film for a reasonable price of $25 per roll plus shipping.  

When I saw the post, "intrigued" did not begin to describe my enthusiasm,  I promptly went onto ebay and ordered two rolls of nearly 20 year old Kodachrome 25 for a future feature, but I ached to get out as soon as I could to shoot a roll of honest, venerable Kodachrome and send it off.  On returning home, I scoured my stocks to discover that I had two "collection" rolls of Kodachrome 25 of 1975 vintage among my inventory.... in 828 format at that! 

The planets seemed to align almost magically, as this was the perfect opportunity for a test roll across the spectrum to see how well different colors rendered in this alternate process. The 828 roll would give me just enough exposures to shoot quickly and send right off  To top it off, after a week of gloomy skies and rains, sun dominated the landscape in the mid-Atlantic as day dawned on January 25th.   To paraphrase Paul Simon, on this day, no one was taking my Kodachrome away after all.



The actual camera for this endeavor was none other than my 1947 vintage Bantam 4.5 Special, my father's camera from his teenage years, and one on which he shot a number of rolls of Kodachrome.  It seemed a fitting honor that my first chance to shoot color Kodachromes again happened to be on this wonderful camera.  Under a blue sky and full sun, I shot off the first 7 exposures, and saved the last for an expected time exposure at dusk back in Frederick.  Along as a companion was another similarly sleek camera in a discontinued format, the Minolta Vectis 300.  On the Minolta, companion shots of most of the scenes were taken to provide a comparison between a C-41 rendering of the scenes with those taken on the Bantam, and processed in the alternative process to K14.  With these images to compare side by side, I expected to be able to determine the type of scenes that will render the most colorfully, as well as what scenes might make for some interesting art.  

Given the age of the film, it was shot roughly between ISO 8 and 10, which generally meant exposures of f/5.6 at 1/50 in full sun.  It was more of an educated guess than anything scientific that went into the decision regarding the speed at which to shoot this film that had sat dormant for over 4 decades.  

I scanned the Kodachrome film using a consumer grade Epson V550 scanner, The original film carried a strong magenta cast to the 42 year old Kodachrome stock to which only levels have been applied under the initial scan.  I then did a second scan using the "Restore Colors" settings, adjusted curves to darken the image, and did some further refinements in Photoshop.  These results shouldn't be interpreted as a "best possible result" but are intended to show some improvement in tones without pushing too far into an overly tweaked look, a balance that is somewhat tenuous given the age of the film and the fogging it encountered. 


- - - - - - - - - 

Scene 1: (APS film above, base Kodachrome scan middle, and "enhanced" Kodachrome scan at bottom) - I selected this scene as my first since it featured a rich blue sky, some earthy green in the backdrop, and a subject clad in metallic gold.  The APS version pretty much rendered the scene as it was, while you'll noticed a strong magenta cast to the 42 year old Kodachrome film to which only levels have been applied.  After using restoration settings in the scanning software and further tweaks in Photoshop, the Kodachrome image portrays more naturally, albeit with an olive cast, discoloration in the sky, and green elements of the scene with nearly no saturation levels. An interesting first start. 






- - - - - - - - - --

Scene 2: (Base Kodachrome scan above, and "enhanced" Kodachrome scan at bottom) - Curious of how the one magenta flower in a bed of ivy would portray, I shot it only with the the Bantam.  The result is among the most "artistic" of the batch, with the green ivy rendering in a more or less grey hue, and the flower depicted in a deep orange hue.  



- - - - - - - - - - - - -

Scene 3: (APS film above, base Kodachrome scan middle, and "enhanced" Kodachrome scan at bottom) - If there was one color that Kodachrome was known for, it was red.  So when I saw the red taxicab caught at the red light, I elected to snap a couple of quick photos from the middle of the street.  The same blue sky dominates the scene, while food trucks in shades of yellow and orange also make an appearance in the scene.  Once again, the blue renders lovely, and while the brick tones of red on the buildings in the distance render well, the vivid red hues give off a muted hue, as does the orange on the traffic cone and second food truck. The yellow again portrays well, albeit with a bit of a warm hue.   




- - - - - - - - - - - -

Scene 4: (APS film above, base Kodachrome scan middle, and "enhanced" Kodachrome scan at bottom) - a variety of "natural" tones of stone and brick are the most evident in the below scene.  One of my favorites of the batch, the Kodachrome image gives off a very vintage feel, reminding me of the color palette given off by the very early 1938 Kodachrome in Weekly Feature #73.  It seems this process is well suited for scenes of somewhat muted colors to begin with, set off by bright blue skies. 



- - - - - - - - - - - - -

Scene 5: (APS film above, base Kodachrome scan middle, and "enhanced" Kodachrome scan at bottom) - Another look at red's potrayal is tackled below, as a bright red awning hovers over a brick sidewalk, while a different hue of red can be seen on the banner in the distance. The red is again muted, and seems to be the most vivid in the brick building on the left of the frame.   



- - - - - - - - - - -

Scene 6: (APS film above, base Kodachrome scan middle, and "enhanced" Kodachrome scan at bottom) - My main reason for taking this photo was the desire to capture different shades of green.  The street sign is more of a kelly green, while the distant covering and evergreen foliage offers more natural shades.  However, it was evident that if there was one color these slides failed to convey, it was green.  Both street sign and distant foliage are rendered in a nearly monochrome grey hue.  That said, even the blue is a bit subdued on this example. 



- - - - - - - - - -

Scene 7: (APS film above, base Kodachrome scan middle, and "enhanced" Kodachrome scan at bottom) - The banner in this image allowed me to capture some less primary colors in my testing, and consisted of a deep purple backdrop, and letters in a pale red, pale yellow, pale green, tangerine orange, and sea green respectively. Some primary shades of red and blue are evident in the scene for comparison.  I like this one for many of the same reasons as I like the results in scene #4, but this one manages to bring in a few more colors.  Again, the sky is rendered nicely, while the warm cream hue in "The Residences" sign's lettering is very accurate.  The already soft tones of the ZENGO sign are also fairly well represented in this image.  



- - - - - - - - -

Scene 8: (APS film above, base Kodachrome scan middle, and "enhanced" Kodachrome scan at bottom) - As a fan of time exposures, I couldn't resist saving a dusk scene from Carroll Creek in Frederick as my last shot on this trial roll.  Ok, first of all, I don't know how I botched the focus in the Bantam's last shot, though setting the aperture to f/11 and shooting bulb may have caused some issues.  The scene didn't have a lot of variation in color to begin with, and the Kodachrome did capture the soft hues of this setting with some degree of accuracy. 



- - - - - - - - -

One other observation about the differences between the slides I received back, and those done with typical Kodachrome processing is that these lacked the "etched" look on the reverse side of the slide, a signature feature evident in any Kodachrome processed slide, whether from 1940 or 2000.  If there was anything that certainly reinforced to me that this was a recreation of the K-14 process rather than a replication of the process, this would be it.


Note the relief evident on the 1940 Kodachrome to the left, when held to the light a certain way.  I was unable to detect similar relief in my experimental roll of Kodachrome recently developed. 

In summary, you might think I am disappointed in the results from this batch, but I can assure you that I am not.  I remain amazed at what Mr. Fuller has been able to achieve, really enjoyed this wonderful experiment, and look forward to supporting him in the near and distant future should he continue to provide this service.  My next roll to him will be significantly less vintage than this classic roll of 828 Kodachrome.

More important to note is that Mr. Fuller is continuing to make revisions to this process to improve color accuracy, tonality, and contrast in the results, so as he continues to make strides in these areas, we can expect that results will improve.  For now though, this is a major milestone in being able to produce positive images in color from Kodachrome film stock, and one that I am thrilled to know exists!